Monday, November 22, 2010

Name Three Innovations That Make Solar More Affordable

Solar power as we know it has been around for almost a century. Many people believe that its still the same basic technology that helped power early spacecraft and the White House in the 1970's. But advancements over the past 10 years have brought solar to the cutting edge with new investment and an emphasis on research. Here are three solar innovations that are making this type of renewable energy more affordable, easier to obtain, and more efficient for generations to come.

1. Thin-Film Cells


When most people picture solar panels, they think of the large black cells with aluminum framing that resemble windows. These are crystalline panels and have been used for decades. The limiting factor with this technology is actually the energy required to produce the panel itself along with weight in shipping. The process for making this technology is similar to the process for making silicon computer chips, it requires highly trained technicians, clean rooms, and energy hungry machinery.

Thin-film solar is a completely different take on solar cells. The cells themselves often come in a roll and the manufacturing process is similar to a printing process. This dramatically reduces the cost of solar power. Panels that use traditional crystalline technology still cost in the $2/watt range. Thin film cells cost closer to $1/watt and that price is falling quickly.

Thin film cells are being consumed in large quantities by utility scale projects now, making it difficult for consumers to get their hands on them. This is changing daily though as nearly every major solar manufacturer has a thin-film model coming out, which will make it easier for the average homeowner to have this exciting new technology. For more information check out First Solar, the premiere manufacturer of thin film solar cells.

2. Micro-Inverters

Inverters are an essential piece of any solar power system. An inverter takes the power that comes from the panels, which is direct current (DC), and changes it into alternating current (AC). AC is what we have in our outlets at home and work and is what most appliances need to operate on. The inverters of the past were large, expensive, and generated large amounts of waste heat. The cheapest inverters cost around $3000, which meant that the cheapest solar power systems were in the $10,000 range.

Microinverters have changed the equation dramatically. Now, for less than $200, you can have an inverter on each solar panel, and have a system that consists of as little as one solar panel if you wish. That means the entry point for installing a solar power system is now as low as $1000. Many people start with just one or two panels, and add on a panel or two each year.

Micro inverters also dramatically increase the efficiency and decrease the installation time for solar power kits. In the not so distance future there will be microinverters integrated into the actual construction of solar panels themselves, which means you may just be able to plug your solar panel right into the wall... or your car! Visit Enphase Solar for more information on microinverters.

3. Flexible Racking Solutions

Most people would be surprised to learn that at least 25% of the equipment cost, and 75% of the labor cost of solar kits goes into the racking systems that hold the panels. And this technology really hasn't changed much in the past 100 years. The process of mounting bolts into the roof surface, rails to the hold the panels, and wiring and grounding systems has been time consuming and dangerous.

Now we are finally seeing some new options in racking for solar and the landscape is changing. In many cases rails are being all together eliminated and grounding systems can be installed in less than half the time it used to take!

Solar costs have already come down by as much as 50% in the past 5 years. Over the next decade, prices should come down even more dramatically, thanks to a renewed interest in this promising technology. Before long solar power will achieve the holy grail: the ability to profitably compete with fossil fuel generated power, without government incentives or subsidies.

SOURCE

1 comment:

Unknown said...

Whatever you do with PV, you are always restricted to between 1,800 and 3,000 hours of generation. The best way to make solar cheap is to separate reception of the solar energy and when you use it to make electricity or use the heat. If you can do the whole year, 8,760 hours the capex figure is divided into a much smaller cost per energy unit and the energy overcomes intermittency.

We can now do this with efficiencies of over 30%. Who needs PV any more?